Rugged Oak - Vented Gas Logs
Since originating the gas log set some 60 years ago, Real-Fyre has grown to offer the broadest selection of log sets to enhance the home, and the most innovative technologies to safeguard the environment. Through it all, the Classic Series has withstood the test of time with traditional favorites, like the Rugged Oak, which will always be in style.
The Real Fyre Rugged Oak Vented Gas Log Set features high definition bark and natural colors for an authentic wood look that will transform the look of your fireplace. These logs are rugged and will emulate a real wood burning fire.
This log set is constructed of superior refractory ceramics to ensure the logs retain their strength at high temperatures. With steel rods inserted in each log, it maximizes reinforcement. Because of the construction radiant heat will be produced during operation and after the set has been turned off.
The G45 ANSI certified burner kits comes complete with burner, custom grate, sand or vermiculite, burner clips, damper clamp and connector kit. The gas line will connect to the hearth kit on the right side of the unit.
Rugged Oak Vented Gas Logs Features
- Superior refractory ceramics ensure the logs retain their strength at high temperatures
- Burns efficiently while protecting natural resources and reducing pollution
- High definition bark and natural colors for an authentic wood look
- Steel rods inserted in each log provides maximum reinforcement
- Radiant heat while in operation and after set has been turned off
- Accessories available to enhance the look of your hearth
|Minimum Fireplace Size
Rugged Oak Vented Gas Logs Specifications and Details:
|18", 24", and 30"
|G45 ANSI certified
|All Controls Available
|Propane /Natural Gas
Rugged Oak Vented Gas Logs Downloadable Documents
Burner Systems FAQ
How you want to control your fire?
Do you want to manually turn your control knob to the “on” position? Or would you prefer a remote control?
MANUAL SAFETY PILOT
This system has a safety pilot that is manually lit and stays lit all the time. Also called a standing pilot, it is similar to a pilot found in a water heater. You can turn the burner on and off manually by reaching inside your fireplace and turning the control knob.
You will typically have a control knob with three positions: ON/OFF/PILOT.
In the pilot position, you can have a standing pilot and will not need to relight it with a match/lighter. You must initially light it with a lighter.
REMOTE CONTROL SYSTEMS
Remote Control systems include a remote pilot valve assembly. Depending on the remote option you select, you will have the ability to control certain functions of the log set from a remote control. Remote controlled options include basic on/off control as well as variable flame height control and some with thermostat control settings.
This remote control will have a Millivolt Valve (standing pilot) - In the pilot position, you can have a standing pilot and will not need to relight it with a match/lighter. You must initially light it with a lighter. A remote will turn the unit on and off. You adjust the height of the flames at the unit.
VARIABLE FLAME HEIGHT REMOTE
This remote control will have a Millivolt Valve (standing pilot) - In the pilot position, you can have a standing pilot and will not need to relight it with a match/lighter. You must initially light it with a lighter. A remote will turn the unit on and off and adjust the height of the flame up and down.