Real Fyre Charred Rugged Split Oak Vented Gas Logs

Vented gas logs can be installed in the following applications: In masonry (natural brick) fireplaces with fully functioning chimneys venting to the outside, prefabricated solid-fuel fireplaces with fully functioning chimneys venting to the outside. Always follow the guidance from the owner's manual.

Vented gas logs are NOT to be installed in the following applications: As replacement logs for a direct vent fireplace or insert. In a vent free firebox or fireplace. Any fireplace not approved for vented gas logs. On top of any burner system that is not designed for them. Always follow the guidance from the owner’s manual.

It's a burner system designed specifically for a set of gas logs.

Figuring out the right size gas logs for your fireplace is as easy. 

1. Measure the inside of your fireplace. Use this helpful measuring guide located in our Gas Log Learning Center
2. Select your control system. Ask youself how you want to operate your gas logs. Either manually or with remote control.
3. Select the proper sized logs based on your measurements and desired control system

Only if you are placing these logs on the exact burner designed for them. 

We recommend you measure the inside of your fireplace and base your purchasing decision on the your fireplace measurements instead of measuring your existing gas logs.

The reason? Because gas logs and burner systems may have different sizing requirements. In one style, you may need an 18" and in another style you may be able to fit a 24" inside of the same fireplace.

Your burner and control system is a complete hearth kit. It includes the burner pan, grate, sand/vermiculite (if needed), embers (if included), valve, and control system.

No worries! We are here to help.

During business hours, feel free to reach out to us via chat or give us a call at 866.757.5344. You can also check out our Gas Log Learning Center and Buying Guide